Menu

Products

Products
breadcrumb shadow

Product Catalog

Home » Thurmalox Stove Paint » Product Details
  

Thurmalox 270 & 290 Series Colors

High Temperature Paint

Thurmalox 270 & 290 series coatings are high temperature, fast drying formulations specifically designed to protect stoves (wood, coal, gas, pellet, etc.), hearth equipment and other metal surfaces operating at temperatures up to 1200°F. Thurmalox series coatings provide outstanding adhesion, film integrity, color stability and thermal shock resistance throughout this entire temperature range.
Data Sheet
Download the PDF file stovepaintdatasheet
SDS (Aerosol)
Download the PDF file 270_Aerosol_SDS_2022
SDS (Bulk)
Download the PDF file 270_SDS_2022
Available sizes
  • Aerosol
  • Quart
  • 1 Gallon

Thurmalox 270 & 290 series coatings are high temperature, fast drying formulations based on silicone resins and thermally stable pigments. They are formulated specifically to protect stoves (wood, coal, gas, pellet, etc.), hearth equipment and other metal surfaces operating at temperatures up to 1200°F (648°C). Thurmalox 270 & 290 series coatings provide outstanding adhesion, film integrity, color stability and thermal shock resistance throughout this entire temperature range. For exterior applications, use Thumalox 245 Primer on bare metal surface to seal and prevent rust.

Thurmalox 270 & 290 series coatings are available in multiple colors. See 270 & 290 Series available at www.Net4Sale.com.

Features
• Withstands intense heat to 1200° F (648° C)
• Will not peel, flake or chalk
• Won’t bleach or discolor
• Withstands repeated thermal cycling
• Dries for handling in 15 minutes
• Long-lasting
• Available 12 oz. aerosol cans for touch-up
• Resistant to scratching and marring
Common Uses
• Stoves (wood, coal, pellet, gas, etc.)
• Stove pipe
• Free-standing fireplaces and fireplace inserts
• Fireplace hoods, screens, and accessories
• Furnaces and heaters
• Engines, manifolds, mufflers
Not Recommended For
• Immersion service
• Direct contact with flame
• Cooking surfaces
• Porcelain surfaces

Specification Data

SKU
27x-xx
Generic Type
Silicone
Color
Black, See color card. Also available in custom colors.
Finish
Low sheen, satin colors, metallic and clear gloss
Intermittent Peak Temperature
1200° F
Continuous Temperature
1000°F (538°C)
Components
1
Application Methods
Spray|Brush|Spray Preferred
Theoretical Coverage
7-8 square feet per aerosol can
40 square feet per quart
100 to 120 square feet per gallon
Application Temperature
60-90°F (16-32°C)
Drying Time to Touch
15-20 minutes
Drying Time to Recoat
1-2 hours
Drying Time to Handle
20-30 minutes
Curing Requirements
Fire unit for full cure (after 24 hour air dry)
Weight
Aerosol Cans - 16 oz.
Quart - 5 lbs.
Gallon - 12 lbs.

Application Instructions

Surface Preparation
1. To ensure optimum long term coating system performance, surfaces must be clean, dry and free from dirt, oil grease, salts, welding flux, oxides, old paint or other foreign matter.

2. Prepare surface by power washing, vapor degreasing, solvent cleaning or other chemical and mechanical methods.

3. Surface cleaning methods recommended will depend upon type of foreign matter to be removed and condition of substrate. Consult Dampney Technical Service for specific recommendations.
Mixing
Aerosol Cans - Shake can vigorously for one minute until mixing ball begins to rattle.

Bulk - Redisperse any settled pigments by stirring with a paint paddle followed by thorough mixing to a uniform consistency with an explosion-proof or sir-driven power mixer. Do not open containers until ready to use. Keep lid on container when not in use.
Thinning
Only thin Thurmalox 270 & 290 series coating with Dampney 100 thinner.
Note: Use of other thinners not approved by Dampney may hinder product performance and void product warranty.
Cleanup
Clean up tools with acetone, MEK or toluene.
Thoroughly flush spray equipment and hoses immediately after use with Dampney 100 Thinner. Dismantle spray equipment and clean parts, brushes and rollers with Dampney 100 Thinner.
Precautionary Information
WARNING: Flammable Liquid and Vapor Keep away from heat, sparks and flame. Vapors may cause flash fire. Do not breathe vapors or spray mist. Avoid contact with eyes, skin and clothing. Use with adequate ventilation during mixing and application. Wear an appropriate, properly fitted organic vapor cartridge-type respirator (NIOSH/MSHA approved) during and after application unless air monitoring demonstrates vapor/mist levels are below applicable limits. Follow respirator manufacturer’s directions for respirator use. Wash thoroughly after handling. Wear protective gloves, chemical safety goggles and impervious protective clothing. Use skin cream. In confined spaces it is required to use a positive pressure supplied-air respirator (NIOSH/MSHA approved). Use explosion-proof lights and electrical equipment. Use only nonsparking tools and equipment. Wear conductive and nonsparking footwear. Make certain all electrical equipment is grounded. Observe all safety precautions and follow procedures described in OSHA regulations. See Material Safety Data Sheet (MSDS) for complete precautionary and disposal information. If instructions and warnings cannot be strictly followed, do not use this product.
ORDER INFORMATION
  To place orders and/or obtain pricing information contact:

Dampney Company
85 Paris Street
Everett, MA 02149
TEL: (617) 389-2805

Available Colors by Size

Product Line

Common uses include Furnaces, Grill frames, BBQ grills, Fireplace screens, Propane tanks, Radiators, Wood Stoves, Stove Pipe, Exhaust Manifolds and Mufflers!

Thurmalox 270 & 290 series coatings are high temperature, fast drying formulations specifically designed to pr . . .
Thurmalox 270 series coatings are high temperature, fast drying formulations specifically designed to protect . . .
Thurmalox 282 Stainless Steel series coatings are high temperature, fast drying formulations specifically desi . . .
Thurmalox 293 is a heat-resistant, fast-drying, silicone-based clear lacquer formulated to prevent tarnishing, . . .
Thurmalox 290 series coatings are high temperature, fast drying formulations specifically designed to protect . . .
Thurmalox 270 series coatings are high temperature, fast drying formulations specifically designed to protect . . .
Thurmalox 245 is the primer for both Thurmalox 270 Series and Thurmalox 280 Aluminum heat resistant topcoats. . . .
Technical Data Page for Thurmalox Series packaged in Aerosol cans . . .
High Temperature Water Based Coating . . .
Thurmalox 250 is a selective black silicone-based heat resistant coating designed for use on metal surfaces of . . .